Everything about William Strutt Inventor totally explained
William Strutt (
1756 –
1830)
FRS, was a
cotton spinner in
Belper,
England.
Strutt was the first son of
Jedediah Strutt and, after a good education, joined his father's business at the age of fourteen. He also inherited his father's mechanical abilities and is said to have thought of the self-acting mule some years before
Richard Roberts patented it in
1830, but the technology wasn't available to make it work.
Be that as it may, he looked after the technical side of the business, while his brothers, Joseph and George Benson dealt with commercial and management side respectively. It became known as W.G. and J. Strutt..
He became a successful architect, designing many of the bridges in
Derby and the original Derby Infirmary in
1810. In
1779 he was made a freeman of Derby and Burgess of the Borough, allowing him to vote in Parliament. He was co-founder of the
Derby Philosophical Society with
Jeremy Bentham and
Erasmus Darwin and was President for twenty-eight years.
A major problem with the
nineteenth century timber framed mills was fire, particularly if they worked with inflammable materials. When
Darley Abbey Mill burnt down in
1788 it was rebuilt with sheets of tin fastened to the beams as protection. Many engineers of the day were addressing the problem which was nation-wide.
Strutt had used cast-iron for bridges in Derby, and applied it to building, first a calico mill in Derby and the Warehouse at Milford (pulled down in 1964 to make a car park), and then the new West Mill, built in
1795 at Belper. Tile and gypsum plaster floors were supported on brickwork arches supported on cast iron columns. The timber beams were encased in thin sheet iron. To reduce weight, the upper floors were supported on hollow earthenware pots encased in plaster.
He went on to build a five storey
flax mill at
Ditherington near
Shrewsbury where the beams were also of cast-iron thus building one of the first iron-framed factory. He used the same principle to rebuild
Belper North Mill after it burnt down in
1803.
He built a number of other mills in Belper and Milford, the most remarkable perhaps was the Round Mill. This was probably influenced by the ideas of Jeremy Bentham for an octagonal building with a central overseer.
He married Barbara, the daughter of Thomas Evans of
Darley Abbey, his first son
Edward later becoming
Lord Belper. He also had three daughter Elizabeth, Anne and Frances and two daughters who died in infancy.
In
1817 he was elected a Fellow of the
Royal Society.
William died in
1830 and was buried in the Unitarian Chapel in Friargate, Derby.
Further Information
Get more info on 'William Strutt Inventor'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://william_strutt__inventor.totallyexplained.com">William Strutt (inventor) Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |
